Dosage:

- Product specifically developed to clean residual oil in cooling circuits.

​

Application:
1 - With the engine at ambient temperature, add the product to the cooling system, in an amount between 5 to 10% of its capacity;

2 - Close the expansion tank and start the engine. Keep it running to allow the product to circulate multiple times throughout the cooling system;

3 - Turn off the engine and wait for the temperature and pressure to decrease. Carefully drain the entire cooling system;

4 - Thoroughly flush the entire circuit with water to rinse off any residues;

5 - Finally, fill the cooling system with coolant/antifreeze.

​

​

(If the circuit is not completely clean, repeat the entire procedure)